DRIVER GUIDE FOR SELF TAPPING TIMBER SCREWS, MACHINE SCREWS AND SOCKET SCREWS
Below is Anzor Driver Guide a table showing the driver tips stocked by size starting from No 0 Square Drive through to No 3 Phillips and Square (Robertson) Drive, also showing which size self tapping screw or machine screw suits each driver size and type. Driver tips are available in a range of lengths from 50 to 150mm and longer driver tips may be available on request. Hex Washer Face Tek Screws use a Nutsetter drill fitting (shown above), these too are displayed in the following table and show what sized screws (comonly know as roofing screws) they best suit.
Our range of Anzor Deck Driver decking screws and or Fischer Masonry Anchor Screws use a Torx or 6 lobe drive, while the suitable size is shown below for the Fischer Screws, the Anzor Deck Drivers use a T20 Lobe (Torx) driver tip.
The following table shows the size of hex driver bits stocked by Anzor and which type of hex drive screw they match including Button Head Socket Screw, Countersunk Socket Screw, Bugle BAtten Screw and Countersunck Socket Coachscrew.