BSP Elbows - Stainless
Anzor Stainless BSP Elbows are available as 90 degree BSP Elbows, 45 degree BSP Elbows and 90 degree BSP Street Elbows (BSP male to BSP female).
Anzor Stainless BSP fittings are manufactured by the lost wax casting method (not sand cast). This means they have a smooth finish, which not only looks good, but is also more corrosion resistant. With sand cast fittings the fittings are more likely to have air pockets and therefore more likely to fail.
When Installing Stainless BSP fittings make sure enough sealant or PTFE tape is used to make a leak proof joint. Also don't grind or cut pipe using carbon based cutting discs, only use inox cut-off discs, so cross contamination doesn't occur.
Also available in the family of Anzor Stainless BSP fittings are BSP Reducing Bushes, BSP Reducing Sockets, BSP Sockets, BSP Hex Caps, BSP Round Caps and BSP Ball Valves, BSP Back Nuts, BSP Unions, BSP Equal Tees, BSP Hex Nipples, BSP Male & Female Elbows (BSP Street Elbows), BSP Hose Tails and BSP Reducing Nipples.