Stainless Steel Self Tapping Screws
Self Tapping Screws - Stainless
Used into wood, metal or plastic and are available in a range of sizes, head types and drives and are identified as such. Often used for applications such as securing Timber Decking (Stainless Decking Screws) or self-tapping into Aluminium or Timber sections.
Anzor Deck Drivers - 6 Lobe Decking Screws
Our new 316 stainless ‘Deck Drivers’ self-drill into soft and hardwood decking timber. Pre-drilling is not required, except at the board ends. They have a trim head so are more discrete, and the 6-Lobe drives provide excellent torque.
Stainless Decking Screws -Square Drive
Particle Board (Chipboard) Screws, also known as Stainless Decking Screws are square drive stainless screws and have a thread cutting tip and a course thread. Again they are identified by their gauge and length, stocked in 8g,10g and 12g from ¾' to 4' long. Ribbed particle board screws are also available which have a series of ridges on the cone part of the countersunk head which aid in gripping the material.
Bugle Headed Decking Screws are countersunk but their countersunk head has a more fluted shape similar to the shape of the stem of a wine glass. Available in 8g and 10g and in 304 or 316 stainless. The wide bugle head gives superior hold down performance ideal for keeping you decking timber from lifting.
Hex Head Coach Screws (Lagscrews) are used to hold timber of larger proportions together where it is not practical to gain access to the reverse side to fit a nut. Diameters range from 6mm through to 16mm and from 25mm in length to 200mm. We also have a small range of countersunk coach screws with a socket drive head.
Stainless Self Tapping Screws and Tek Screws
Hex Head Self Tappers (Stainless Self Tapping Screws) are similar to Coach screws with a hexagonal bolt like head but have a finer thread which runs the full length of the shank. Available in 10g, 12g and 14g.
Hex Socket Head Self Tappers (Stainless Self Tapping Screws) have a cap screw type head with a hex drive socket.
Hex Washer Face Type 17 Self Tappers are similar to Tek screws but designed to be used with wood. Available in 316 stainless only and have a Type 17 flute at the tip of the thread. These screws can be used to fasten roofing iron to a wooden truss.
Truss Head Self Tappers have a wide low profile domed head or mushroom type head. They have a phillips drive and are available in 6g, 8g, 10g and 12g.
Stainless Lag Screws (Hanger Bolts)
Lag Screws have a machine screw thread at one end and a woodscrew thread at the other with a section of plain or hexagon shank in the middle. Or hex socket at one end. Identified by their metal thread diameter and overall length.
Quik Drive - Collated Square Drive Screws
Quik Drive Collated Square Drive Screws are a unique system of auto feed collated screws, Ideal as Decking Screws. Fastening has never been as fast or as cost-effective. Collated-screw fastening tools are replacing traditional nail guns for their speed, reliability and power. Quik Drive® auto-feed screw driving systems are easy to use.
Screws size is described by gauge (diameter) and length usually always described in an imperial value, gauges commonly range from 2g which is 2.08mm up to 14g which is 6.3mm.