Yield Strength is the tension applied load at which a fastener experiences a specified amount of permanent deformation. In other words, the material has been stressed beyond its elastic limit and has entered its plastic zone.
Thread Size d |
Stress Area AS |
Tensile Load in kN as xRm* | |||
---|---|---|---|---|---|
A2-50 (Unmarked) | A2-70 & A4-70 (304 & 316 Class 70) |
A4-80 (316 Class 80) & Bumax 88 |
Bumax 109 | ||
M3 | 5.03 | 1.06 | 2.26 | 3.02 | n/a |
M3.5 | 6.78 | 1.42 | 3.05 | 4.07 | n/a |
M4 | 8.78 | 1.84 | 3.95 | 5.27 | 8.00 |
M5 | 14.20 | 2.98 | 6.39 | 8.52 | 13.00 |
M6 | 21.10 | 4.22 | 9.05 | 12.06 | 18.00 |
M8 | 36.60 | 7.69 | 16.47 | 21.96 | 33.00 |
M10 | 58.00 | 12.18 | 26.10 | 34.80 | 52.00 |
M12 | 84.30 | 17.70 | 37.94 | 50.58 | 76.00 |
M14 | 115.00 | 24.15 | 51.75 | 69.00 | 93.00 |
M16 | 157.00 | 32.97 | 70.65 | 94.20 | 125.00 |
M18 | 192.00 | 40.32 | 86.40 | 115.20 | 154.00 |
M20 | 245.00 | 51.45 | 110.25 | 147.00 | 196.00 |
M22 | 303.00 | 63.63 | 64.63 | n/a | n/a |
M24 | 353.00 | 74.13 | 74.13 | 282.00 | n/a |
M27 | 459.00 | 96.36 | 96.39 | 367.00 | n/a |
M30 | 561.00 | 117.81 | 117.81 | 449.00 | n/a |
Note: This chart is provided as cross reference. For accurate values the actual specifications should be reviewed.
Tensile Strength Comparison Chart | What is loading? |
Are you sick of cutting your bolts down?
How to install Stainless Down Pipe Brackets
Calculate the corrosion resistance of your stainless steel with our PREN calculator
To receive useful info and product updates add your details below
Request a hardcopy of our product wall chart or download a PDF.
Download a PDF of our paper based catalogue.